Wifi.wavlink.com
WiFi.wavlink.com Setup instructions for the Wavlink Extender to connect to a wireless internet modem or router. You can use a WIFI booster to increase the signal of your existing wireless network and provide consistent connectivity to all far devices.
What is Wifi.wavlink.com?
Wifi.wavlink.com is a web address for connecting to the wireless range extender that is not accessible online. A user must go to Wifi.wavlink.com to link the extender with the main modem or router in order to install the WIFI repeater or extender using a web-based setup.
So, here’s how to get to the Wavlink extender configuration page:
- Switch the wireless repeater to the repeater mode after turning it on.
- Use a laptop or a tablet when the power light comes on.
- Connect to the EXT network through the Wi-Fi settings option.
- Open any web browser, such as Mozilla Firefox, Google Chrome, or Microsoft Edge, once you’ve established a connection
- Then, in the address box, type Wifi.wavlink.com.
- It will now redirect you to the setup screen. Enter in the default password “admin”.
- Once you logged in follow the on-screen instruction to connect your repeater to your main modem/router.
How to manually access the Wifi.wavlink.com login page?
Let’s take a brief look at how to install the Wavlink extender using the manual method:
- Connect your Wavlink extender to your main router or modem.
- When you see the firm power light on the extension, you’re ready to go
- Take out any wifi-enabled gadget, such as a phone, tablet, or laptop.
- After that, go to your wifi device’s settings and select the wifi option.
- Wavlink Extender Setup Ext will appear as a network name.
- When you’ve connected to the ‘EXT’ network,
- Type Wifi.wavlink.com into any web browser’s address bar.
- On the screen, you’ll notice a new extension setup page.
- wavlink.com is a great place to start. To install/connect the extender, follow the Extender Setup instructions.
Wavlink extender setup using WPS Button
Using the wireless protected setup (WPS) button to connect the extender to an existing wifi network is one of the simplest ways to do so.
To install the extender, follow the procedures below:
- The extender should be placed close to the main wifi modem or router as the initial step.
- Connect the Wavlink WIFI range extender to the internet and turn it on.
- Wait for the power lead to turn solid green before proceeding.
- Push the W.P.S button on the extender once you’ve gotten the power led light.
- Now go to your router/modem and press the W.P.S button on the router/modem.
- A blinking green light will appear on your router and extension
- Allow 1-2 minutes for the extension to connect with the home wifi network.
- The configuration of the Wavlink extender has been completed successfully.
- To finish the setup, go to Wifi.wavlink.com and log in.
How to update the latest firmware through Wifi.wavlink.com?
The firmware update will repair any bugs or lags experienced while using the booster. Nevertheless, the official company does not suggest you all update the operating system of the Extender when it is working perfectly.
- When you need to upgrade the firmware of your Wavlink extender to make sure that the device functions better and consistently. For doing this, follow all the instructions given below.
- Get the latest firmware for your booster from our ap.setup website.
- The file which you downloaded has to be extracted to get the firmware file.
- Launch up any internet browser and log in to web-based Wavlink page or enter 192.168.10.1. Now, click on ‘Setup’ and then you have to select and click on the ‘Upgrade Firmware’ option.
- Tap on Choose File/Browse button to open up the extracted firmware file.
- Finally, tap on ‘Apply’ and stand by till updating process is finished.
- When your booster is updated to the latest firmware, it will fix all the bugs from your repeater.
- After your upgrade, you will also see many types of changes and new features in your Wavlink Wi-Fi range extender.