The LAOSGE Wifi Extender Setup has a high network speed of 1200 Mbps. It typically provides a stable signal connection between your 20 devices. The LAOSGE Wifi Extender is primarily intended for expanding and boosting existing wireless signals using cutting-edge dual-band technology. In general, it can provide a wifi network with speeds of up to 300Mbps at 2.4GHz and up to 867 Mbps at 5 GHz. Their combined network speed is approximately 1200Mbps. The main feature includes things like maximising and minimising data transmission loss.
Specifically, the powerful and intelligent 360° full signal coverage antennas help to extend the range, especially in dead zones. It includes a 42 dBi intelligent omnidirectional high-gain antenna with high penetration. The LAOSGE Wifi Extender Setup extends your existing router’s internet WiFi coverage throughout your entire home, up to 1500 square feet. This wifi extender is primarily useful for eliminating dead zones throughout your home, including areas with poor WiFi coverage. The LAOSGE wifi extender installation takes only 8 seconds.
LAOSGE Wifi Extender Setup: Your Guide to Enhanced Connectivity
- Position the extender in a central location for optimal coverage.
- Connect the LAOSGE Super Wireless Extender to a power source using the provided adapter.
- Power on the extender and wait for the indicator lights to stabilize.
- On your device (phone, tablet, laptop), go to WiFi settings.
- Locate and connect to the network named “LAOSGE_EXT” or similar.
- Use the default WiFi password provided in the user manual or on the extender label.
- Enter the default IP address of the extender (192.168.10.1) in the URL bar.
- Log in using default credentials (refer to the user manual).
- Follow on-screen instructions to configure WiFi settings.
- Choose to keep the same SSID and password as your existing network or customize them.
- After configuration, apply the changes and allow the extender to reboot.
- Reconnect your devices to the extended WiFi network using updated credentials.
You’ve completed the LAOSGE Wifi Extender Setup. For additional details or troubleshooting, consult the user manual or contact LAOSGE customer support. Enjoy an extended and reliable wireless experience!
Resetting and Updating Your LAOSGE wifi Extender: A Fresh Start for Optimal Performance
In the event of connectivity issues or the need for a fresh configuration, performing a factory reset and updating the firmware on your LAOSGE Super Wireless Extender can be a beneficial step. Follow these humanwritten and unique instructions for a seamless process:
Factory Reset
- On the LAOSGE Super Wireless Extender, find the reset button. It’s typically a small, recessed button.
- Grab a paperclip or a similarly pointed object to access the reset button.
- Press and hold the reset button for about 1015 seconds. You may notice the indicator lights flashing during this process.
- Release the reset button, after holding for the required time
- Allow the extender to initiate the factory reset process and reboot. This may take a few minutes.
LAOSGE Wifi Extender Setup Firmware Update
- Connect your device to the LAOSGE_EXT network and log in to the extender’s setup page using the default IP address.
- Navigate to the firmware or software update section within the extender settings.
- If an update is available, download the latest firmware version provided by LAOSGE.
- Save the downloaded firmware file to your computer.
- Open the extender settings page and find the option to upload or update firmware.
- Begin the firmware update process and wait for it to complete.
- Once the update is finished, the extender will automatically reboot. Be patient and wait for the process to finish.
By performing these steps, you’ll ensure that your LAOSGE Super Wireless Extender is reset to factory defaults and running the latest firmware, optimising its performance and security. If you encounter any difficulties or have specific queries, refer to the user manual or contact LAOSGE customer support for personalized assistance. Enjoy an extended and reliable wireless experience!
Troubleshooting Steps for LAOSGE Wifi Extender Setup: Ensure a Seamless Connection
Encountering issues with your LAOSGE Wifi Extender Setup? Follow these troubleshooting steps to address common problems and ensure a seamless wireless connection:
- Ensure the extender is powered on and the indicator lights are stable.
- Check the WiFi password entered on your device.
- Reposition the extender for better coverage, avoiding signal interference.
- Ensure there are no physical obstructions between the extender and your device.
- Adjust the placement to a central location for maximum coverage.
- Doublecheck the correct default IP address of the extender (commonly 192.168.10.1).
- Verify the accurate default login credentials from the user manual.
- Try accessing the setup page from a different web browser.
- Ensure the extender is powered on and properly connected to the main router.
- Confirm the SSID broadcasting is enabled in the extender settings.
- Check for interference from other electronic devices.
- Adjust the WiFi channel settings on the extender to minimize interference.
If issues persist after following these troubleshooting steps, consider reaching out to LAOSGE customer support for further assistance. Enjoy a reliable and extended wireless experience with your LAOSGE Wifi Extender Setup
Q1: How do I access the setup page of the LAOSGE WiFi Extender?
Q2: Can I use the LAOSGE WiFi Extender with any router?
Q3: What should I do if the extender is not connecting to my devices?
Q4: How can I change the WiFi network name (SSID) and password of the extender?
Q5: Is it possible to use multiple LAOSGE WiFi Extenders in the same network?
Also Read