Elevate your home’s wifi experience with the Setek Wifi Extender, a user-friendly device designed to broaden your network coverage and eliminate pesky dead spots. This unobtrusive gadget effortlessly plugs into any outlet, seamlessly connecting to your existing wifi network. Once synced, it extends your network range, conquering those previously unreachable corners of your home.

WPS Setup

Simplify the connection process with Wi-Fi Protected Setup (WPS), allowing you to link your Setek Wifi Extender to your current wifi network without the hassle of extensive data entry. Here’s how to set it up step by step:

1. Plug your Setek Wifi Extender into an outlet in the same room as your router.
2. Wait for the LED light on the Setek Wifi Extender to turn a solid, reassuring green.
3. Press and hold the WPS button on your router for 2-3 seconds.
4. Simultaneously, press and hold the WPS button on the Setek Wifi Extender for 2-3 seconds.
5. Witness the LED light blink briefly, followed by a solid green glow, indicating successful connection to your wifi network.

Web-Based Setup

For those who prefer an alternative to WPS, the web-based setup offers a seamless solution. Follow these steps to configure your Setek Wifi Extender via a web browser:

1. Establish a connection between your computer and the Setek Wifi Extender using an Ethernet cable.
2. Open your preferred web browser and enter this address: ie 192.168.10.1
3. Input the default username and password: Username: admin, Password: admin.
4. Navigate to the “Wireless” tab.
5. Choose your wifi network from the available options.
6. Input your wifi network password.
7. Click the “Save” button.
8. After a quick restart, your Setek Wifi Extender will seamlessly integrate with your wifi network.

Troubleshooting Steps for SETEK WIFI EXTENDER

Login Procedures

To access your Setek Wifi Extender, simply follow these steps:

1. Open a web browser and enter the following address: 192.168.10.1.
2. Input the default username and password: Username: admin, Password: admin.

Resetting

Encountering issues? Reset your Setek Wifi Extender to factory settings effortlessly:

1. Locate the reset button on the Setek Wifi Extender.
2. Hold down the reset button for 10 seconds.
3. After a restart, your Setek Wifi Extender will be restored to factory defaults.

Firmware Updates

Keep your Setek Wifi Extender up to date by following these firmware update steps:

1. Download the latest firmware update from the Setek website.
2. Extract the firmware update file onto a USB drive.
3. Insert the USB drive into the Setek Wifi Extender.
4. The automatic detection process initiates the update, and the device restarts upon completion.

Access Point Configuration

Transform your Setek Wifi Extender into an access point with these straightforward steps:

1. Connect your computer to the Setek Wifi Extender using an Ethernet cable.
2. Access a web browser and input the address: 192.168.10.1.
3. Input the default username and password: Username: admin, Password: admin.
4. Navigate to the “Wireless” tab.
5. Select “AP Mode.”
6. Specify your desired SSID and password for the access point.
7. Click “Save.”
8. Following a restart, your Setek Wifi Extender seamlessly operates as an access point.

ALSO READ- PixLink WiFi Repeater Setup

FAQ